LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1995 >> MX-6 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Throttle Body >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Remove air intake tubes.
  2. Disconnect accelerator cable, coolant hoses and electrical connectors from throttle body as necessary. Remove throttle body. To install, reverse removal procedure using NEW throttle body gasket. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals