LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> MX-3 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Idle Speed & Mixture >> Idle Speed >> MPV

Idle Speed: MPV

  1. Connect jumper wire between ground and Green 1-pin test connector in left front corner of engine compartment. See Figure or Figure . On 2.6L, connect tachometer to White 1-pin test connector in left front corner of engine compartment.
  2. On 3.0L, connect tachometer to test connector at ignition coil (White wire). On all models, if idle speed is not within specification, rotate idle air adjusting screw on throttle body. See the IDLE SPEED SPECIFICATIONS  table. Disconnect jumper wire.
scientia non olet · About LEMON Manuals