LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 250h Base >> Repair and Diagnosis (Single Page) >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Control System (Diagnostic Codes) (4 Of 5) >> Hybrid Control System >> DTC P3123-87: Lost Communication with Drive Motor Control Module "A" from Hybrid/EV Control Module Missing Message [10/2018 - ] >> Description

DTC P3123-87: Lost Communication with Drive Motor Control Module "A" from Hybrid/EV Control Module Missing Message [10/2018 - ]: Description

For a description of the inverter.

Refer to DTC P0D2D-16: Drive Motor "A" Inverter Voltage Sensor(VH) Circuit Voltage Below Threshold; DTC P0D2D17: Drive Motor "A" Inverter Voltage Sensor(VH) Circuit Voltage Above Threshold; DTC P0D2D1F: Drive Motor "A" Inverter Voltage Sensor(VH) Circuit Intermittent [10/2018 - ]

The MG ECU, which is built into in the inverter with converter assembly, controls motor (MG2) based on commands from the hybrid vehicle control ECU. The MG ECU monitors communication data and detects malfunctions.

The hybrid vehicle control ECU monitors communication data and detects malfunctions.

A communication error between the MG ECU and the hybrid vehicle control ECU.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P312387 Lost Communication with Drive Motor Control Module "A" from Hybrid/EV Control Module Missing Message Error in reception from inverter with converter assembly (MG ECU) via serial communication (out of communication standard)
(1 trip detection logic)
  • Wire harness or connector
  • Inverter with converter assembly
  • Hybrid vehicle transaxle assembly
  • Hybrid vehicle control ECU
  • PCU FR fuse
Comes on Master Warning:
Comes on