DTC P2610: ECM / PCM Internal Engine Off Timer Performance [08/2015 - 08/2019]: Procedure

1. Replace the ECM (Refer to REMOVAL [08/2015 - ] ).

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear the DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ] ).
5. Start the engine and wait for 10 minutes or more.
6. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes / Pending.
7. If no pending DTC is output, the repair has been successfully completed.

Result: 

NEXT 

END