Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor will run whenever these DTCs are not present | See LIST OF DISABLE A MONITOR |
| Battery voltage | 11 V or more |
| Fuel system status | Closed loop (for 13 seconds or more) |
| Throttle position learning | Completed |
| Warm-up condition to enable air fuel ratio learning control | Conditions are met |
| Either of following conditions (a) or (b) is met | - |
| (a) Engine RPM | Less than 1,000 rpm |
| (b) Intake air amount per revolution | 0.28 g/rev or more |