Circuit Description
The TP sensor is a variable resistor that monitors throttle opening. TP sensor is mounted in throttle body. The ECM determines vehicle driving condition and adjusts air/fuel mixture accordingly. DTC P0120 is set when ECM consistently detects less than .1 volt on VTA circuit. DTC P0120 is also set if ECM consistently detects 4.9 volts or more on VTA circuit. Possible causes are:
- TP Sensor Open Or Short Circuit
- TP Sensor
- ECM
NOTE:
If DTCs P0110, P0115 and P0120 are output together, inspect ECM terminal E2 (ground) circuit for an open. Repair as necessary. See appropriate wiring diagram in SYSTEM WIRING DIAGRAMS
article.