Repair Procedures: Inspection

1. The engine control system can be more quickly diagnosed for problems by using the KDS (Refer to "DTC INDEX . ").
   1. Self diagnosis: Checking failure and Diagnosis Trouble Code (DTC)
   2. Data analysis: Checking the system input/output data state
   3. Actuation test: Checking the system operation condition
   4. Software Management: Controlling other features including system option setting and Zero-Adjustment

Inspection component 

1. Turn the ignition switch OFF.
2. Disconnect the injector connector.
3. Measure resistance between the injector terminals 1 and 2.
4. Compare the measured resistance with the specification.

Refer to "Specifications  "