| DTC Strategy |
- Controller malfunction check failure of controller operation
|
- Poor connection
- PCM
- Programming error
|
| Enable Conditions |
Case1 |
- Battery voltage is at between 10 and 16V
- Ignition "ON"
|
| Case2 |
- Engine speed is lower than 32 RPM
|
| Case3 |
- Battery voltage is at between 10 and 16V
- Engine speed is lower than 32 RPM
|
| Case4 |
|
| Threshold Value |
Case1 |
- Error bit information from HW circuit checksum failure
|
| Case2 |
- Integrity of the knock acquisition is not correct
|
| Case3 |
- Power stage output for port flap has over temperature
|
| Case4 |
- Microcontroller communication error detected
|
| Diagnostic Time |
Case1 |
|
| Case2 |
|
| Case3 |
|
| Case4 |
|
| MIL ON Condition |
|