LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte5 LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Control System - 1.8L) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
Fig 1: Locate Manifold Absolute Pressure Sensor Connector
G11793829Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals