LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Automatic Transaxle Control System - 1.8L) >> Inhibitor Switch >> Repair Procedures >> Signal Circuit Inspection

Signal Circuit Inspection

WARNING: This page is about a different car, the 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Inhibitor switch connector.
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".

    Specification:  "SIGNAL CODE TABLE "

    SIGNAL CODE REFERENCE

      P P-R R R-N N N-D D
    Signal "1" 12V 12V 0 0 0 0 0
    Signal "2" 0 12V 12V 12V 0 0 0
    Signal "3" 0 0 0 12V 12V 12V 0
    Signal "4" 0 0 0 0 0 12V 12V
scientia non olet · About LEMON Manuals