LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2003 >> Spectra Base, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnosis & Overhaul >> Automatic Transaxle Control System >> O/D Switch >> Installation

O/D Switch: Installation

  1. Feed wires through sleeve and panel.
  2. Insert wires into connector.
  3. Install panel.
  4. Install sleeve over shift selector lever.
  5. Adjust wires (from bottom of sleeve) until shift selector knob can be set in place.
    NOTE: Wires must go through groove in shift selector knob.
  6. Install two shift selector knob screws.
  7. Install light bulb.
  8. Install connector and secure wires in provided plastic molding slots.
  9. Install four panel mounting screws.
    Fig 1: Install Terminals Into Connector
    G01080010Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals