LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.0L Diesel

2.0L Diesel

Fig 1: Cooling Temperature Sensor & Wire Harness Connector
GC0159853Courtesy of CHRYSLER GROUP, LLC
  1. Apply MOPAR® thread sealant with PFTE part number 04318034 to sensor threads.
  2. Install the Engine Cooling Temperature (ECT) sensor (2) to cylinder head. Tighten sensor to 11 N.m (97 in. lbs.).
  3. Connect the ECT sensor wire harness connector (1).
    Fig 2: Engine Cover
    GC0157479Courtesy of CHRYSLER GROUP, LLC
  4. Install the engine cover.
  5. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals