Glow Plug: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable.
Remove generator (Refer to ELECTRICAL/CHARGING/GENERATOR - REMOVAL) .

Disconnect glow plug electrical connectors. See Fig 2.

NOTE: The intake manifold inlet tube must be removed to remove the cylinder # 3 glow plug. See Fig 1.

Fig 1: Intake Manifold Air Inlet Tube

Courtesy of DAIMLERCHRYSLER CORP.

1 - CYLINDER HEAD COVER/INTAKE MANIFOLD

2 - AIR INLET TUBE GASKET

3 - INTAKE MANIFOLD AIR INLET TUBE

4 - RETAINING BOLTS

Remove glow plugs from cylinder head. See Fig 2.

Fig 2: CYLINDER HEAD ASSEMBLY

Courtesy of DAIMLERCHRYSLER CORP.

1 - CYLINDER HEAD BOLT

2 - GLOW PLUG

3 - COOLANT FITTING

4 - CYLINDER HEAD ALIGNMENT DOWEL

5 - GLOW PLUG HARNESS

6 - CYLINDER LINER

7 - CYLINDER BLOCK

8 - CYLINDER HEAD GASKET

9 - CYLINDER HEAD

10 - ROCKER ARM ASSEMBLIES