LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Ignition Control) >> Glow Plug Module >> Installation

Glow Plug Module: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the glow plug wiring harness connector. See Figure.
  2. Secure the relay onto the inner fender well. See Figure
  3. Connect the negative battery cable.