Power Mirror Motor
Remove door trim panel. See FRONT DOOR TRIM PANEL under REMOVAL & INSTALLATION. Disconnect power mirror harness connector. Connect 2 jumper wires between specified terminals at power mirror harness connector, and note power mirror motor reaction. See POWER MIRROR MOTOR TEST table. See Fig 1 . If power mirror does not react as specified, replace power mirror. See POWER MIRROR ASSEMBLY under REMOVAL & INSTALLATION.
POWER MIRROR MOTOR TEST
| Connect 12 Volts To Terminal No. | Connect Ground To Terminal No. | Mirror Reaction |
|---|---|---|
| 1 | 4 | Up |
| 4 | 1 | Down |
| 2 | 3 | Left |
| 3 | 2 | Right |