LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules -- XJ/X351 >> MULTIFUNCTION Electronic Modules >> Diagnosis And Testing >> Driver Door Module >> Manual SUNBLIND Initialization Routine

Manual SUNBLIND Initialization Routine

Where a sunblind module has been replaced, there is an initialization routine available on the diagnostic tool. This requires a new module to be initially installed in the fully down position and running of the "Initialize Specified Function/Feature" diagnostic routine on the manufacturer approved diagnostic tool. Alternatively, the sunblind may be initialized manually by following the procedures described below:

  1. Raise the sunblind to top (fully retracted) position
  2. Press and hold the window 'down' switch for 15 seconds (the sunblind will go down and will then be in initialization mode)
  3. Release window switch and press window 'down' switch again to drive blind fully into lower block
  4. Activate window switch 'up' until the sunblind reaches the top (fully retracted) position and release switch
  5. The sunblind is now initialized and should have 'one-touch' functionality
scientia non olet · About LEMON Manuals