LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2004 >> Ascender LS, 5.3 P, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 5.3L >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Pipe/Hose Components
    GM730806Courtesy of GENERAL MOTORS CORP.
  1. Uncap the fuel fill pipe (9).
  2. Install the fuel fill pipe (7).
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Connect the fuel fill hose (9) to the fuel fill pipe (7).

    Tighten:  Tighten the clamp to 2.5 N.m (22 lb in).

    4. Fig 2: Locating Fuel Fill Pipe Ground Strap Bolt
    GM730802Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel fill pipe ground strap bolt (3).

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  5. Lower the vehicle.
    6. Fig 3: Locating Fuel Fill Pipe Bracket Nuts
    GM730799Courtesy of GENERAL MOTORS CORP.
  6. Install the fuel fill pipe bracket nuts (2).

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

    7. Fig 4: View Of Fuel Fill Pipe Housing
    GM730795Courtesy of GENERAL MOTORS CORP.
  7. Install the fuel fill pipe housing.
  8. Install the fuel fill cap.
scientia non olet · About LEMON Manuals