LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2024 >> QX55 Essential >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (Direct Adaptive Steering) (DTC/Circuit Diagnosis) (2 Of 2) >> DTC/Circuit Diagnosis >> C13EE-00 INCOMP CONFIG >> DAST 2 >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

  1. PERFORM CONFIGURATION 
    1. Perform configuration for each control module. Refer to Work Procedure (EPS/DAST 3), Work Procedure (DAST 1), Work Procedure (DAST 2).

    >>

    GO TO 2.

  2. PERFORM SELF-DIAGNOSIS 
    1. SYMBOL CONSULT
      1. Ignition switch ON.
      2. Erase "Self Diagnostic Result" mode of "DAST 2".
      3. Ignition switch OFF and wait for at least 10 seconds.
      4. Start engine.
        CAUTION:

        Never drive the vehicle.

      5. Select "Self Diagnostic Result" mode of "DAST 2".

    Is DTC "C13EE-00" detected?

    YES>>

    Replace steering angle sub control module. Refer to Removal and Installation .

    NO>>

    Inspection End.