DTC Confirmation Procedure
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
: GO TO 2.
- RECHECK DTC
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Steer 30° leftward slowly. Steer 30° rightward. Return the steering wheel to the straight-ahead position.
- Turn the ignition switch OFF.
- Turn the ignition switch ON.
- Perform self-diagnosis for "4WAS (FRONT)".
Is DTC "C1667" detected?
YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Start the engine.