DTC Confirmation Procedure

1. PRECONDITIONING

   If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

   GO TO 2.

2. CHECK DTC DETECTION

With CONSULT 

1. Start the engine.
2. Select "SLCT LVR POSI" and "VHCL/S SE-A/T" in "Data Monitor" in "TRANSMISSION".
3. Drive vehicle and maintain the following conditions for 5 seconds or more.

   SLCT LVR POSI : D

   VHCL/S SE-A/T : 5 km/h (3 MPH) or more

4. Perform "Self Diagnostic Results" in "TRANSMISSION".

   Is "P1705" detected? 

   YES: Go to "DIAGNOSIS PROCEDURE ".

   NO: INSPECTION END