LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M45 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Body, Lock & Security System >> Intelligent Key System >> Removal and Installation of Intelligent Key Unit >> Removal

Removal and Installation of Intelligent Key Unit: Removal

  1. Remove dash side finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect intelligent key unit connector.
  3. Remove intelligent key unit mounting nuts, and then remove intelligent key unit.
    Fig 1: Identifying Intelligent Key Unit
    G05212287Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals