Check Detention Switch

1. Turn ignition knob LOCK position.
2. Check voltage between Intelligent Key unit connector and ground.

Fig 1: Connector Terminal Reference Chart

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Voltage Between Intelligent Key Unit Connector And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK : Door switch circuit is OK.
2. NG : GO TO 2.

1. Disconnect A/T device (detention switch) connector.
2. Check voltage between A/T device (detention switch) connector M67 terminal 3 (R/Y) and ground. (Check harness for open.)
   1. 3 (R/Y) - Ground : Battery voltage 
   Fig 3: Checking Voltage Between A/T Device (Detention Switch) Connector M67 Terminal 3 (R/Y) And Ground

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Check continuity between A/T device (detention switch) connector M67 terminals 3 (R/Y) and ground. (Check harness for short.)
   1. 3 (R/Y) - Ground : Continuity should not exist. 

Fig 4: Checking Continuity Between A/T Device (Detention Switch) Connector M67 Terminals 3 (R/Y) And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK : GO TO 3.
2. NG : Repair or replace harness.

Check continuity between A/T device (detention switch) terminals 2 and 3.

Fig 5: Connector Terminal Reference Chart

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: Checking Continuity Between A/T Device (Detention Switch) Terminals 2 And 3

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK : GO TO 4.
2. NG : Replace back A/T device (detention switch).

Check continuity between A/T device (detention switch) connector M67 terminal 2 (B) and ground.

1. 2 (B) - Ground : Continuity should exist. 

Fig 7: Checking Continuity Between A/T Device (Detention Switch) Connector M67 Terminal 2 (B) And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK : Check harness connection.
2. NG : Repair or replace harness.