LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson SE, 4WD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 2.0L >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line. (Proceed to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
  2. Remove the rear seat. (Proceed to Body - "REAR SEAT ASSEMBLY ")
  3. Remove the fuel pump service cover (A).
    Fig 1: Locating Fuel Pump Service Cover
    G11643750Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump control module connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the fuel pressure sensor connector (C).
  6. Disconnect the fuel feed tube quick connector (D) and the vapor tube quick-connector (E).
    Fig 2: Locating Fuel Feed Tube Quick Connector And Vapor Tube Quick-Connector
    G11643751Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the locking ring (A) by using the special service tool [No.: 09310-B8100].
    Fig 3: Locating Locking Ring
    G11643752Courtesy of HYUNDAI MOTOR AMERICA
    Fig 4: Locating Fuel Pump Control Module
    G11643753Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals