LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 4.6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 3.8L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air intake hose (Refer to "INTAKE AND EXHAUST SYSTEM " in EM group).
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
    Fig 1: Identifying ETC Module Connector
    G08834134Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the installation bolts, and then remove the ETC module (C) from the engine.
    Fig 2: Identifying ETC Module And Coolant Hoses
    G08834135Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals