LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Insight Base >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Entry Lights Control System >> Ignition Key Switch Test

Ignition Key Switch Test

  1. Remove the steering column upper and lower covers (see GLOVE BOX STRIKER REPLACEMENT ).
  2. Disconnect the 6P connector (A).
    Fig 1: Identifying 6P Connector
    G06431619Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals No. 1 and No. 2.
    • There should be continuity with the key in the ignition switch.
    • There should be no continuity with the key removed.
  4. If the continuity is not as specified, replace the steering lock assembly (see CHECK OF LOCK LEVER FORCE ).
scientia non olet · About LEMON Manuals