LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Hummer EV 2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance Systems - Repair Instructions >> Repair Instructions >> Automated Driving Mapping Module Replacement >> Installation Procedure

Installation Procedure

  1. GM5778937Courtesy of GENERAL MOTORS COMPANY

    Automated Driving Mapping Module (1) - Install

  2. Secure the retaining tabs.
  3. Connect the electrical connectors.
  4. GM5787976Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct - Left Side (1) - Install

  5. GM5787975Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Floor Front Air Outlet Duct Bolt (1) - Install and tighten - Fastener Specifications

  6. GM5787973Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct Bolt (1) - Install and tighten - Fastener Specifications

  7. GM5776101Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (1) - Install

  8. GM5776100Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Bolt (2) - Install and tighten - Fastener Specifications

  9. Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Install
  10. GM5787901Courtesy of GENERAL MOTORS COMPANY

    Install the left front floor mat (1).

  11. Return the seat to its original position.
  12. Perform the necessary programming and setup procedure: Control Module References
scientia non olet · About LEMON Manuals