Programming the Autolock Feature Using the Instrument Cluster (IC) Message Center
NOTE:
The autolock feature can be activated or deactivated independently of the auto-unlock feature.
NOTE:
The autolock feature can also be configured ON or OFF with the scan tool. For additional information on module configuration, refer to
MODULE CONFIGURATION
.
- With all the vehicle doors closed, turn the ignition key from the OFF to the ON position.
- Access the locks menu within the setup menu in the message center.
- Select autolock and use the left and right arrows to enable or disable the feature.
NOTE:
Refer to the Owner's Literature a complete list of the message center menus.