LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Taurus SES, 3.0 U, AX4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Engine-3.8L) >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly

Disassembly And Assembly Of Subassemblies: Piston: Disassembly

WARNING: This page is about a different car, the 2003 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, press the piston pin out from the connecting rod and piston assembly.
    Fig 1: Removing Piston Pin From Connecting Rod And Piston Assembly
    G01623852Courtesy of FORD MOTOR CO.
  2. Remove the connecting rod from the piston.
    Fig 2: Removing Connecting Rod From Piston
    G01623853Courtesy of FORD MOTOR CO.
  3. Clean and inspect the connecting rod and piston. For additional information, refer to ENGINE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals