LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 392 (Engine Cooling System) >> General Procedures >> Engine & Radiator Flushing >> Material

Engine & Radiator Flushing: Material

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION

Item Specification
Motorcraft Premium Cooling System Flush VC-1 Or Equivalent ESR-M14P7-A
    WARNING: Do not open the cooling system while it is hot or while the engine is running.
  1. Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING & BLEEDING - 2.3L  or COOLING SYSTEM DRAINING, FILLING & BLEEDING - 3.0L & 4.0L .
  2. Remove the water thermostat.
  3. Install the water thermostat housing without the water thermostat.
  4. Use an appropriate cooling system flusher to flush the engine and radiator.

    Use premium cooling system flush.

  5. Install the water thermostat.
  6. Backflush the heater core. For additional information, refer to HEATER CORE BACKFLUSHING .
  7. Fill the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING & BLEEDING - 2.3L  or COOLING SYSTEM DRAINING, FILLING & BLEEDING - 3.0L & 4.0L .
scientia non olet · About LEMON Manuals