LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Summit Wagon Base, 1.8 D, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Hall Effect & Optical Ignition >> Power Transistor (Expo/Expo LRV 1.8L)

Power Transistor (Expo/Expo LRV 1.8L)

  1. Disconnect power transistor connector. Using a 1.5-volt dry cell battery, connect negative end of 1.5-volt battery to terminal No. 12 of power transistor and positive end of 1.5-volt battery to power transistor terminal No. 6.
  2. Using an analog ohmmeter, check for continuity between terminals No. 5 and 12 of power transistor. Continuity should exist. With positive end of 1.5-volt battery disconnected, no continuity should exist. Replace power transistor if it does not test as specified.
scientia non olet · About LEMON Manuals