LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Limited, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> COIL, Ignition >> Removal >> 3.5L

COIL, Ignition: Removal: 3.5L

Fig 1: IGNITION COILS AND FUEL RAIL - 3.5L
GC0080073Courtesy of CHRYSLER LLC
  1. Remove engine cover.
  2. Disconnect and isolate the negative battery cable.
  3. Remove the upper intake manifold. Refer to REMOVAL .
    Fig 2: IGNITION COILS AND ENGINE COVER STUDS
    GC0080074Courtesy of CHRYSLER LLC
  4. Unlock and disconnect electrical connector (2) from ignition coils.
  5. Remove mounting bolts and engine cover studs (1).
    CAUTION: Prior to removing the ignition coils, spray compressed air around the coils and spark plugs. If dirt and debris enter the engine, this may cause internal engine damage.
  6. Twist, lift and remove ignition coil from engine.
scientia non olet · About LEMON Manuals