LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems >> Fuel Tank >> Installation (Neon)

Installation (Neon)

  1. To install, reverse removal procedure. Install fuel line on fuel filter/fuel pressure regulator on fuel pump module using proper procedure. See FUEL LINE DISCONNECT FITTINGS .
  2. Tighten fuel tank strap nuts to specification. See TORQUE SPECIFICATIONS .
  3. Check for fuel leaks by starting engine or by pressurizing fuel system. Fuel system may be pressurized by using scan tool manufacturer's instructions and scan tool connected to Data Link Connector (DLC) to perform ASD FUEL SYSTEM TEST. When performing ASD FUEL SYSTEM TEST, the ASD relay and fuel pump relay remain energized for 7 minutes unless test is stopped or ignition switch is turned to OFF position.
scientia non olet · About LEMON Manuals