LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1990 >> Imperial >> Repair and Diagnosis >> Body & Frame >> Seats - Power >> Testing >> Center Motor Test >> Bench Seat

Bench Seat

  1. Disconnect power seat switch. Connect a jumper wire between Red wire terminal and either Red/White or Yellow/White wire terminals in front of switch connector. See Figure .
  2. Connect second jumper between Black wire terminal and open connection in front of connector. If motor does not operate, reverse jumpers in front of connector. If motor will not operate, inspect wiring harness. If wiring harness is okay, replace 3-motor assembly.
scientia non olet · About LEMON Manuals