LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse Premier, 4WD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment >> Repair Instructions >> Rear Camber Adjustment

Rear Camber Adjustment

  1. GM4311514

    Rear Suspension Lower Control Arm Inner Nut (1) - Loosen

  2. GM4311524

    Rotate the rear suspension lower control arm adjust bolt (1) until the correct camber measurement is achieved. Wheel Alignment Measurement 

    NOTE:

    Tighten the nut and bolt enough to maintain the adjustment. Verify the camber reading prior to tightening the bolt to its final torque.

  3. GM4311514
    CAUTION:

    Refer to Fastener Caution .

    Hold the rear suspension lower control arm adjust bolt and tighten the rear suspension lower control arm inner nut (1). Lower Control Arm Replacement

  4. Check the alignment specification and readjust if necessary. Wheel Alignment Specifications 
scientia non olet · About LEMON Manuals