LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure

Removal Procedure

WARNING:

If you are replacing the wheel(s), the wheel stud(s), the wheel nut(s) or the wheel bolt(s), install only new GM original equipment parts. Installation of used parts or non-GM original equipment parts may cause the wheel to loosen, loss of tire air pressure, poor vehicle handling and loss of vehicle control resulting in personal injury.

  1. Remove Front Brake Rotor - Front Brake Rotor Replacement
    2. Fig 1: Pressing Wheel Stud From Bearing/Hub
    GM595784Courtesy of GENERAL MOTORS COMPANY
  2. Use the J-35910  remover to press the wheel stud (1) from the front wheel bearing and hub assembly flange (2).

    DISCARD the stud.

scientia non olet · About LEMON Manuals