Removal Procedure
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief
- Disconnect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection
- Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
- Disconnect the electrical connector (2).
- Remove Fuel Injection Fuel Rail Fuel Pressure Sensor (1) @ Fuel Injection Fuel Rail Assembly (3)
Fig 1: Fuel Injection Fuel Rail Assembly, Fuel Injection Fuel Rail Pressure Sensor And Electrical Connector
WARNING:
Refer to Gasoline/Gasoline Vapors Warning
WARNING:
Refer to Safety Goggles and Fuel Warning
CAUTION:
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution
NOTE:
Replace the noise cancelling foam component if it is exposed to and has absorbed automotive fluids.