LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse LS, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Ignition Can/Cannot Be Turned Off with Transmission in Any Gear >> Component Testing

Component Testing

Ignition Lock Cylinder Control Switch

  1. Ignition OFF, disconnect the harness connector at the ignition lock cylinder control switch.
  2. Test for infinite resistance between terminal A and terminal B with the switch in the open position.
    • If less than specified, replace the ignition lock cylinder control switch.
  3. Test for less than 2 ohms between terminal A and terminal B with the switch in the closed position.
    • If greater than the specified range, replace the ignition lock cylinder control switch.
scientia non olet · About LEMON Manuals