LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Uplander LS, Van Passenger Extended, 3.9 1 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Electrical >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Battery Current Sensor Electrical Connector
    GM1533512Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .
  2. Remove the tape (3) securing the battery current sensor (1) to the negative battery cable (4).
    3. Fig 2: Identifying Battery Current Sensor
    GM1533515Courtesy of GENERAL MOTORS CORP.
  3. Remove the battery current sensor (2) from the negative battery cable (1).
scientia non olet · About LEMON Manuals