LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Metro LSi, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls - Remove/Install/Overhaul - 1.0L) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.

Turn ignition off. Disconnect negative battery cable. Open glove box. Apply pressure to sides of glove box to disengage 2 clips. Pull glove box down. Remove 3 bolts and PCM bracket. Disconnect electrical connectors from PCM. Remove PCM. To install, reverse removal procedures.

scientia non olet · About LEMON Manuals