Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Verify the scan tool parameter: Interior Trunk Lid/Liftgate Window Unlatch Switch = Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component: S58B Rear Compartment Lid Unlatch Switch - Interior - Pressed
Verify the scan tool parameter: Interior Trunk Lid/Liftgate Window Unlatch Switch = Active
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- All OK.