LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> ATS Base, 2.5L Eng VIN A >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: EBCM
    GM3425145Courtesy of GENERAL MOTORS COMPANY
  1. Install the EBCM (1) to the BPMV.
    2. Fig 2: EBCM Bolts
    GM3425144Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the EBCM bolts (1) and tighten to 6 (53 lb in).
  3. Connect the EBCM electrical connector.
    4. Fig 3: Windshield Washer Solvent Container Filler Tube
    GM3425143Courtesy of GENERAL MOTORS COMPANY
  4. Install the windshield washer solvent container filler tube (1). Refer to Windshield Washer Solvent Container Filler Tube Replacement (with CE1) , Windshield Washer Solvent Container Filler Tube Replacement (with CE4) .
  5. Program the EBCM. Refer to Electronic Brake Control Module Programming and Setup .
scientia non olet · About LEMON Manuals