32 31 004 Removing And Installing/Replacing Upper Section Of Steering Column Trim

Necessary preliminary tasks:

Remove lower section of steering column trim . See 32 31 020 REMOVING AND INSTALLING/REPLACING LOWER SECTION OF STEERING COLUMN TRIM .
Move steering column into "lower" and "extended" position
Remove wood trim on instrument panel, middle . See 51 45 363 REMOVING AND INSTALLING/REPLACING CENTER WOOD TRIM ON INSTRUMENT PANEL .

NOTE: The steering wheel/front section has been removed to simplify the depiction in the graphics.

Unclip cover caps (1).

Unfasten screws.

Installation:

Replace expansion rivets.

Fig 1: Locating Cover Caps And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off upper section with a firm jolt and remove towards rear.

Fig 2: Pulling Off Upper Section With Firm Jolt

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Pins (1) must engage in locks (2).

Fig 3: Engaging Pins In Locks

Courtesy of BMW OF NORTH AMERICA, INC.