LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (EVAP System) >> EVAP Canister Replacement

EVAP Canister Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the EVAP canister cover (A).
    Fig 1: Identifying EVAP Canister Cover
    G05458440Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the hoses (A), the FTP sensor 3P connector (B), and the EVAP canister vent shut valve 2P connector (C).
    Fig 2: EVAP Canister Vent Shut Valve 2P And FTP Sensor 3P Connector With Torque Specifications
    G05458441Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (D).
  4. Remove the EVAP canister assembly (E).
  5. Remove the EVAP canister bracket (A).
    NOTE: The canister filter remains on the bracket.
    Fig 3: EVAP Canister Bracket With Torque Specifications
    G05458442Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals