LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 3.2CL Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L V6 Engine >> Engine Oiling >> Engine Oil >> Removal & Installation

Removal & Installation

NOTE: Under normal conditions, the oil filter should be replaced at every other oil change. Under sever conditions, the oil filter should be replaced at each oil change.

Change interval:

  1. Warm up the engine.
  2. Remove the drain bolt (A), and drain the engine oil. See Fig 1.
  3. Reinstall the drain bolt with a new washer (B).
  4. Refill with the recommended oil. See OIL CAPACITY  table.
  5. Run the engine for more than 3 minutes, then check for oil leakage.
    OIL CAPACITY

    Application Specification - Qt. (L)
    At Oil Change 3.5 (4)
    At Oil Change Including Filter 3.9 (4.4)
    After Engine Overhaul 4.4 (5)
Fig 1: Removing Drain Bolt & Draining Engine Oil
G00299067Courtesy of AMERICAN HONDA MOTOR CO., INC.