Power Window Motor: Installation
WARNING: This page is about a different car, the 2004 Acura 3.5RL, 2003 Acura 3.5RL, 2003 Acura 3.2TL, 2002 Acura 3.5RL, and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Grease all sliding surfaces on regulator. Ensure power window moves up and down smoothly. Adjust as necessary. See ADJUSTMENTS . Apply adhesive along edge of plastic cover to maintain a continuous seal, leaving elongated holes open.
To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Grease all sliding surfaces on regulator. Ensure power window moves up and down smoothly. Adjust as necessary. See ADJUSTMENTS . Apply adhesive along edge of plastic cover to maintain a continuous seal, leaving elongated holes open.